News Media by Aarkstore.com announces, a new market research report is available in its vast collection.
European Solid-State Lighting General Lighting LED Lamp Market Forecast 2010-2015
http://www.aarkstore.com/reports/European-Solid-State-Lighting-General-Lighting-LED-Lamp-Market-Forecast-2010-2015-145435.html
This report, by Company, provides the research findings of our study of the European consumption of Light Emitting Diode Lamps (also known as “consumer-level bulbs” or “consumer-level globes”), which are used in luminaires in stationary (non-vehicle) solid-state lighting (SSL) General Lighting applications.
Solid State The term "solid state" refers to the fact that light in a light emitting diode (LED) is emitted from a solid object, that has do not contain moving parts or parts that can break, rupture, shatter, leak or contaminate the environment —a block of semiconductor—rather than from a vacuum or gas tube, as is the case in traditional incandescent light bulbs and fluorescent lamps.
General Lighting Stationary Applications The definition used by Companyfor General Lighting is – lighting that is used to provide the main illumination of an area. Companyincludes Directional Lighting, Supplementary Lighting and Architectural Lighting in the General Lighting category; however, “architainment” lighting, such as large display units are not considered in the General Lighting segment. LEDs used in signage, displays, signals, decorative Christmas/holiday lighting are not included in the market forecast data for this study.
LED lamps used in theaters, photography, news-gathering (TV broadcasts, film, similar) and even lighting used in nightclubs on the dance floor and in operation rooms (surgery) are considered in the General Lighting application.
LEDs are used in both functional and decorative light fixtures, with an advantage of energy savings. Compared to incandescent lighting, LED-based solid-state lighting (SSL) delivers visible light with reduced heat. In addition, its solid-state nature provides for greater resistance to shock, vibration, and wear, thereby significantly increasing its lifespan.
LED Level Quantified in the CompanyStudy Below, are five levels (or “food chain”) pertaining to the LED marketplace. For the purposes of this Companystudy, we quantify and provide a market forecast for “Level 4”
Level 1 - The chip or die
Level 2 - The LED component (component-level bulb)
Level 3 - LED array; may include optics, heat sink and/or power supply
Level 4 - Lamp
Level 5 - Luminaire (light fixture/lamp holder)
This report provides the 2010-2015 market data by the following functions:
• Consumption Value (US$, Million)
• Quantity (number/units in Millions)
• Average Selling Prices (ASP US$, each)
The value is determined by multiplying the number of units (lamps) by the average selling price (ASP) in US Dollars. The ASPs are not retail prices; the prices are based on the price of the LED lamp at the initial factory level (prior to FOB – Free On Board; therefore, no shipping expenses are included). The value is then based on the end-use application in Europe.
This study is based on analysis of information obtained continually over the past eight years, but updated through the end of June of 2011. During this period, Companyanalysts performed interviews with authoritative and representative individuals in the LED and lighting industry, plus – R&D and factory/manufacturing, from the standpoint of both suppliers and users of LED and lighting illumination products. The interviews were conducted principally with:
• Architectural lighting Designers/Installers concerns, Engineers, marketing personnel and management at manufacturers of LED lighting and related equipment, as well as other lighting technologies.
• Design group leaders, engineers, marketing personnel and market planners at major users and potential users of LEDs and lighting
• Other industry experts, including those focused on standards activities, trade associations, government and investments.
The interviews covered issues of technology, R&D support, pricing, contract size, reliability, documentation, installation/maintenance crafts, standards, supplier competition and other topics.
Market Forecast Product Categories This market forecast of European consumption is presented for five major lamp-type categories. The lamp categories, in turn, may have multiple sub-categories, which are determined by lamp luminous flux and/or the physical size of the lamp. Note: lower-level products, which are indented in the list shown in Table 1, are summed-up to the higher-level product category stated above it.
Related Reports :
http://www.aarkstore.com/search/viewresults.asp?search=European&PubId=&pagenum=1
European Solid-State Lighting General Lighting LED Lamp Market Forecast 2010-2015
http://www.aarkstore.com/reports/European-Solid-State-Lighting-General-Lighting-LED-Lamp-Market-Forecast-2010-2015-145435.html
This report, by Company, provides the research findings of our study of the European consumption of Light Emitting Diode Lamps (also known as “consumer-level bulbs” or “consumer-level globes”), which are used in luminaires in stationary (non-vehicle) solid-state lighting (SSL) General Lighting applications.
Solid State The term "solid state" refers to the fact that light in a light emitting diode (LED) is emitted from a solid object, that has do not contain moving parts or parts that can break, rupture, shatter, leak or contaminate the environment —a block of semiconductor—rather than from a vacuum or gas tube, as is the case in traditional incandescent light bulbs and fluorescent lamps.
General Lighting Stationary Applications The definition used by Companyfor General Lighting is – lighting that is used to provide the main illumination of an area. Companyincludes Directional Lighting, Supplementary Lighting and Architectural Lighting in the General Lighting category; however, “architainment” lighting, such as large display units are not considered in the General Lighting segment. LEDs used in signage, displays, signals, decorative Christmas/holiday lighting are not included in the market forecast data for this study.
LED lamps used in theaters, photography, news-gathering (TV broadcasts, film, similar) and even lighting used in nightclubs on the dance floor and in operation rooms (surgery) are considered in the General Lighting application.
LEDs are used in both functional and decorative light fixtures, with an advantage of energy savings. Compared to incandescent lighting, LED-based solid-state lighting (SSL) delivers visible light with reduced heat. In addition, its solid-state nature provides for greater resistance to shock, vibration, and wear, thereby significantly increasing its lifespan.
LED Level Quantified in the CompanyStudy Below, are five levels (or “food chain”) pertaining to the LED marketplace. For the purposes of this Companystudy, we quantify and provide a market forecast for “Level 4”
Level 1 - The chip or die
Level 2 - The LED component (component-level bulb)
Level 3 - LED array; may include optics, heat sink and/or power supply
Level 4 - Lamp
Level 5 - Luminaire (light fixture/lamp holder)
This report provides the 2010-2015 market data by the following functions:
• Consumption Value (US$, Million)
• Quantity (number/units in Millions)
• Average Selling Prices (ASP US$, each)
The value is determined by multiplying the number of units (lamps) by the average selling price (ASP) in US Dollars. The ASPs are not retail prices; the prices are based on the price of the LED lamp at the initial factory level (prior to FOB – Free On Board; therefore, no shipping expenses are included). The value is then based on the end-use application in Europe.
This study is based on analysis of information obtained continually over the past eight years, but updated through the end of June of 2011. During this period, Companyanalysts performed interviews with authoritative and representative individuals in the LED and lighting industry, plus – R&D and factory/manufacturing, from the standpoint of both suppliers and users of LED and lighting illumination products. The interviews were conducted principally with:
• Architectural lighting Designers/Installers concerns, Engineers, marketing personnel and management at manufacturers of LED lighting and related equipment, as well as other lighting technologies.
• Design group leaders, engineers, marketing personnel and market planners at major users and potential users of LEDs and lighting
• Other industry experts, including those focused on standards activities, trade associations, government and investments.
The interviews covered issues of technology, R&D support, pricing, contract size, reliability, documentation, installation/maintenance crafts, standards, supplier competition and other topics.
Market Forecast Product Categories This market forecast of European consumption is presented for five major lamp-type categories. The lamp categories, in turn, may have multiple sub-categories, which are determined by lamp luminous flux and/or the physical size of the lamp. Note: lower-level products, which are indented in the list shown in Table 1, are summed-up to the higher-level product category stated above it.
Related Reports :
http://www.aarkstore.com/search/viewresults.asp?search=European&PubId=&pagenum=1
Contact us at :
Aarkstore Enterprise
Abhishek Mankar
Tel : +912227453309
Mobile no. +09272852585
Email : contact@aarkstore.com
Website : http://www.aarkstore.com
Blog: http://www.emarketreports.com
Follow us on : http://www.facebook.com/aarkstoreenterprise
http://twitter.com/aarkstoredotcom
http://in.linkedin.com/in/aarkstore
Aarkstore Enterprise
Abhishek Mankar
Tel : +912227453309
Mobile no. +09272852585
Email : contact@aarkstore.com
Website : http://www.aarkstore.com
Blog: http://www.emarketreports.com
Follow us on : http://www.facebook.com/aarkstoreenterprise
http://twitter.com/aarkstoredotcom
http://in.linkedin.com/in/aarkstore
No comments:
Post a Comment